List Price : Price : $13.28
Product Description
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.
Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.
Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.
- Machine Screws are often used with nuts or driven into tapped holes
- Stainless Steel is suitable where formability and cost are important considerations
- Flat head style allows fastener to sit flush to the surface
- Phillips drive is designed to cam out under too much torque
- Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 1-5/8" Length (Pack of 25) Reviews
Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 1-5/8" Length (Pack of 25) Reviews
 Stainless Steel Machine Screw #10-32, Amazon Verified Purchase This review is from: Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC (Misc.) Nothing dramatic here other than the pricing was right for a good quality product. This is a flathead screw so make sure you're not wanting a pan head version of same. Great Prime, Amazon Verified Purchase This review is from: Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC (Misc.) Machine screws were fine, and in a length I couldn't find locally. What really blows me away is that I bought these for a dollar and they were shipped free with my Prime account. I really appreciate it, and the knobs are no longer falling off my kitchen cabinet. apparently the manufacturer couldn't afford the extra 1/8". pretty expensive, but good., By Amazon Verified Purchase This review is from: Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC (Misc.) they have similar ones at my local hardware store, but i wanted the angled head. they dont have as much luster as well. they arent as shiny. which i like better.these went in a computer. on a corsair h50, to hold a fan, shroud, and a finger guard. look good and are strong. |
› See all 3 customer reviews...
No comments:
Post a Comment